TM-6710CL Progressive Scan High-Speed Shutter Camera
www.pulnix.com
3
Connector and Pin Configurations
Camera Link Connector
13 12 11 10 9 8 7 6 5 4 3 2 1
26 25 24 23 22 21 20 19 18 17 16 15 14
MDR 26-pin connector
(0226-622VC)
Pin# Description Pin# Description
1 GND (Shield) 14 GND (Shield)
2 X0- 15 X0+
3 X1- 16 X1+
4 X2- 17 X2+
5 Xclk- 18 Xclk+
6 X3- 19 X3+
7 SerTC+ 20 SerTC-
8 SerTFG- 21 SerTFG+
9 VINIT (CC1-) 22 VINIT (CC1+)
10 INTEG (CC2+) 23 INTEG (CC2-)
11 CC3- 24 CC3+
12 CC4+ 25 CC4-
13 GND (Shield) 26 GND (Shield)
Camera Link Signal Assignment
to Channel Link Chip
Tx IN0 Data A0 (LSB)
Tx IN1 Data A1
Tx IN2 Data A2
Tx IN3 Data A3
Tx IN4 Data A4
Tx IN5 Data A7 (MSB)
Tx IN6 Data A5
Tx IN7 DataB0
TxIN8 DataB1
Tx IN9 DataB2
Tx IN10 DataB3
Tx IN11 DataB4
Tx IN12 DataB5
Tx IN13 DataB6
Tx IN14 DataB7
TxIN15 thru 22 Reserved
Tx IN23
Tx IN24 LDV
Tx IN25 FDV
Tx IN26 Reserved
Tx IN27 Data A6
Data A represents Odd lines (channel A)
Data B represents Even lines (channel B)
PIN 1
1
2
3
4
5
6
9
8
7
11
12
10
12-Pin Connector
1 GND (power) 7 VD in
2 +12V 8 N/C
3 GND (analog) 9 HD in
4 Video out 10 RXD*
5 GND (digital) 11 INTEG
6 VINIT in 12 TXD*
* Optional TTL serial communications
External Synchronization
The TM-6710CL can accept external HD and VD for phase
locking. The internal PLL will accept external HD and lock with
the CCD’s horizontal drive (HD). The CCD HD frequency is half
of the analog video output HD.
Example: Ext. HD = 30.49 kHz; VD will be 120 Hz and
Master Clock will be 50.90 MHz.
The internal sync generator will accept external VD to
generate internal VD. The external VD frequency should be
±5% of the frame rate.
The external sync is TTL level and applied to the 12-pin
connector.
OUTSIDE
CAMERA
INSIDE CAMERA
Ext HD
(or Ext VD)
4.7k
R1
1µF
C1
External Sync Input Schematic
Ext. HD = Analog Output Frequency
Frequency.
_____________________
2
1
2
3
4
5
Channel A
Channel B
V shift registers
Photodiode
CCD output
Horizontal shift registers
Lines
(Odd)
(Even)
At the same horizontal clock cycle, line 1 and odd lines go to
channel A, line 2 and even lines go to channel B. Vertical shift
registers move twice per horizontal blanking period. Lines 1
and 2, 3 and 4, and so on, are output from channel A and B
simultaneously.
Dual-Tap Video Output
The TM-6710CL uses a dual-tap output for its fast frame
readout.
(138 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales