Pulnix TM-5LC Manual de instrucciones descargar pdf (Pagina 11)

INSTALLATION

TM-5LC Super-Miniature Cylindrical CCD Camera Page 5

2.2 Camera Setup

2.2.1 Power Cable

The TM-5LC has a power cable with color-coded ﬂying leads attached to the back of the camera (see

Figure 3 in Appendix). The lead functions are as follows:

Lead Color Function

Yellow +12V DC

Gray GND

White Coax Video Out

Black GND

2.2.2 Power Supply and Power Cable Setup

2.2.2 (a) Power Supplies

PULNiX recommends the following power supplies:

K25-12 110V AC/12V DC 2.1A power supply

P-15-12 220V AC/12V DC 2.1A power supply

K50-12 110V AC/12V DC 4.2A power supply

PD-12 110V AC/12V DC 0.5A power supply

PD-12U 90-220 AC/12V DC 1.2A power supply

2.2.2 (b) PD-12 Power Supply

When wiring the PD-12 power supply directly, please note the following:

•

The lead ends must be twisted together and tin-soldered for strength and electrical continuity.

•

Shrink tubing or a similar insulator should be used to prevent exposed leads from touching and

shorting.

•

The +12V lead is marked with a red stripe or white lettering; be sure not to reverse the leads.

•

All connections must be properly insulated to prevent shorting.

2.2.2 (c) “K” Series Power Supplies

The following procedure should be implemented to connect a “K” series power suply to the TM-5LC

camera:

Attach the 110V line cord to the two terminals marked “AC”. Do not plug the cord into a 110V AC

socket until later in the procedure.

Attach the gray and yellow leads of the power cable to the ground and 12V DC terminals, respec-

tively. Be sure to replace the plastic terminal guard on the power supply at this time.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Sin comentarios

Pulnix TM-5LC Manual de instrucciones Pagina 11