PULNiX AMERICA, INC.
PULNiX America, Inc.
1330 Orleans Drive
Sunnyvale, CA 94089
Tel: 408-747-0300
Tel: 800-445-5444
Fax: 408-747-0660
Innovation at work!
AccuPiXEL Series TM-2016-8
TM-2016-8 Progressive Scan High-Resolution Shutter Camera
SPECIFICATIONS
71-0050 Rev. B
[03/18/2003]
Imager
Active Area
Active Pixels
Cell size
Display Modes
(Active Pixels)
Sync
Data clock output
Resolution
S/N ratio
Min. illumination
Video output
1" progressive scan interline transfer CCD
14.2mm x 8.0mm
1920 (H) x 1080 (V), 16:9 aspect ratio
7.4 µm x 7.4 µm
1920 (H) x 1080 (V) @ 8Hz (normal scan)
1920 (H) x 540 (V) @ 16Hz (two-row binning)
Internal/external auto switching
HD/VD, 4.0 Vp-p impedance 4.7KΩ
VD=8 Hz ±5%, non-interlace,
HD=9.09 kHz±5%
20.0 MHz
Digital: 1920 (H) x 1080 (V),
Analog: over 1200 TV lines (H) x 800 TV lines (V)
50dB min.
2.0 lux, f=1.4 without IR cut filter (no shutter)
Sensitivity: 13µV/e-
Analog: 1.0 Vp-p composite video, 75Ω
Digital output: 8-bit RS-644
AGC
Gamma
Lens mount
Power req.
Operating temp.
Vibration
Shock
Size (W x H x L)
Weight
Functional options
OFF
Programmable LUT(1.0 std.)
C-mount (use 1" format lenses)
12V DC, 440 mA (current measured at 25°)
-10°C to 45°C*
7Grms (10 Hz to 2000 Hz) Random
70G
44mm x 44mm x 64mm
(1.73" x 1.73" x 2.50")
136 grams, 4.8 oz
adjustable back-focus front end
Graphical User Interface
A user-friendly graphical user interface (GUI) of
TM-2016-8 camera control is provided in the CS-232E kit.
This interface allows users to control the following func-
tions of the TM-2016-8 camera:
•
Shutter control for manual, async. and pulse width
control
•
Gain control
•
A/D reference voltages control for Vtop and Vbottom
•
Save settings
•
Load settings
•
Report settings
•
LUT setting and graphic display
•
Scanning mode selection and Option selections
Camera parameters can be
uploaded from the PC to the cam-
era. Once these parameters are
stored in EEPROMs, an instanta-
neous change from one setting to
another can be done with a delay of
a few frames in between.
Serial Communication
Kit
The serial communication kit CS-
232E consists of serial cable RS-
232B-12, a software disk, and a
quick-start guide.The RS-232B-12
cable has a 12-pin connector on the
camera end, and a 9-pin d-sub con-
nector (RS-232) and a 12-pin con-
nector (power and sync signals) on
the other end.
PULNiX AMERICA, INC.
Comentarios a estos manuales