Pulnix TS-9720EN Series Manual de instrucciones descargar pdf (Pagina 38)

Page 30

Uploading the Firmware

TS-9720EN Series Progressive Scan Shutter Cameras

1. Start the EN setup software.

2. Click the “Properties” button.

3. Right-click on the camera, and select “Update Firmware.”

4. Select “Update EN Application.”

5. Reboot the EN camera for the updates to take effect.

Note: You cannot update the identical EN application version.

4.3 Updating the FPGA Bitfile

You can update the FPGA bitfile by using the EN setup software. To do so, follow the steps below.

1. Start the EN setup software.

2. Click the “Properties” button.

3. Right-click on the camera, and select “Update Firmware.”

4. Select “Update FPGA Bit-file.”

5. Reboot the EN camera.

4.4 Updating the Lib/Drv File

You can update the Lib/Driv file by using the EN setup software. To do so, follow the steps below.

1. Start the EN setup software.

2. Click the “Properties” button.

3. Right-click on the camera and select “Update Firmware.”

4. Select “Update Library/Driver.”

5. Reboot the EN camera.

4.5 Updating the OS Image

You can update the OS image by using the EN setup software. To do so, follow the steps below.

1. Start the EN setup software.

2. Click the “Properties” button.

3. Right-click on the camera and select “Update Firmware.”

4. Select “Update OS Image.”

5. Reboot the EN camera.

4.6 Updating the Camera’s H8 Firmware

You can update the camera’s firmware using the EN setup software. To do so, follow the steps below.

1. Start the EN setup software.

2. Click the “Properties” button.

3. Right-click on the camera, and select “Update Firmware.”

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 62 63

Sin comentarios

Pulnix TS-9720EN Series Manual de instrucciones Pagina 38