Pulnix TM-76 Manual de instrucciones descargar pdf (Pagina 33)

Page 26

Operation

TM-6760 Series Progressive Scan Shutter Cameras

• LUT (Look-up Table)

LUT is a powerful tool to adjust the dynamic range as well as color dynamic range. Since human

color perception is non-linear, LUT selection can help optimize color contrast by selecting the LUT

value. Gamma 0.45 is logarithmic and is closed to human perception.

When LUT is selected, black-level adjustment must be more accurate than for B/W cameras.

For a detailed timing chart, please see Section 3.12, “Camera Timing Charts,” on page 28, or

contact JAI PULNiX.

FIGURE 12. TM-6760 Series Camera Rear Panel

TABLE 7. Basic Mode Selections (For Non-CL Versions)

a. These mode descriptions may change from camera model to camera model slightly. The same

functions are controlled by RS-232 or Camera Link software.

Mode Switch Up/Down Switch Functions

0 Switch Disabled Switch Disabled None None

1 Set Gain Up / Down Change gain

2 Set Vtop (A/D) Up / Down Change A/D ref. top

3 Set Vbottom (A/D) Up / Down Change A/D ref bottom

4 Gain Selection #1 Up: 9dB, Down: 12dB Lower gain selection

5 Gain Selection #2 Up: 18dB, Down: 22dB Higher gain selection

6 Linear LUT Up Back to linear table

7 Knee Selection Up / Down (Scroll) Scroll 8 different LUTs

8 Async Reset Mode Up: Normal, Down: Async Async and normal shutter

9 Factory Default Recall Up / Down: Recall Factory setting

A Power up Setting Up: Recall, Down: Save Power up page setting

B User Page Storage#1 Up: Recall, Down: Save User page storage setting

C User Page Storage#2 Up: Recall, Down: Save User page storage setting

D Direct Shutter Control Up / Down Shutter speed increment by 1H

E Scan Format2 Up: PS 200 lines, Down: Binning Scan mode

F Scan Format1 Up: 60 fps, Down: 30 fps Scan mode

CAMERA LINK

POWER VIDEO

SHUTTER MODE

DOWN

DIGITAL

POWER

VIDEO

AccuPiXEL CL Series Camera

Rear View

AccuPiXEL Series Camera

Rear View

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 45 46

Sin comentarios

Pulnix TM-76 Manual de instrucciones Pagina 33