Pulnix TS-9720EN Series Manual de instrucciones descargar pdf (Pagina 14)

Page 4

Installation and Operation

VIS 300/400 EN Setup Software

The last User name is automatically filled in the next time the program is started.

Tip If the password is removed for the last selected user, then ENSetup will startup without

displaying the Login Dialog. By holding the Shift key down during startup, the Login

dialog will be forced to be displayed anyhow so the current user can be changed!

There are three user levels: Restricted user, Supervisor and Administrator. Adding users and user levels

are described in section 3.1.

2.3 Network Adapter Setup

After successful login ENSetup automatically searches for cameras connected to all network adapters

on the PC. If any IP-address problems are detected then a window will be displayed and it will be

possible to correct these problems (see appendix B for a description on how to correct IP-address

problems).

FIGURE 3. EN Camera Setup Main Window

Note: The EN detection process does not locate Cameras that are not part of the local subnet.

Use the Open Camera, or Open Cameras option to connect to cameras outside of the local

subnet. (See section 2.4.3 for more information.)

2.4 Main Window

The EN Camera Setup program has two sections:

2.4.1 Properties that hold the configuration part

2.4.2 Video Window where the image tools are found

Each section is selected by clicking the associated bar in the opening window shown in Figure 2.3.

Tip By holding the shift key down when Properties or Video Window is activated, the windows

are opened in default size and position.

2.4.3 File Menu Bar

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 71 72

Sin comentarios

Pulnix TS-9720EN Series Manual de instrucciones Pagina 14