Pulnix TS-9720EN Series Manual de instrucciones Pagina 23

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 72
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 22
Page 13
Installation and Operation
VIS 300/400 EN Setup Software
2.5.4 => Advanced Settings Sub Menus
This command opens up a sub-menu with all available advanced settings.
FIGURE 16. Advanced Settings Sub-Menu
2.5.4 (a) =>Advanced Settings=>Save/Restore Settings inside Camera(s)=>Save
Settings into Flash Memory
This command saves the current setting in the camera as shown by EN Setup into the cameras flash
memory. The camera will then start up with these settings next time it reboots.
2.5.4 (b) =>Advanced Settings=>Save/Restore Settings inside Camera(s)=>Restore
Settings from Flash Memory
This command loads the settings from the cameras flash memory into the current setting of the camera.
This can be used for restoring settings from last time it was saved in the camera and thereby ignoring
changes that have been made since then.
2.5.4 (c) =>Advanced Settings=>Export Settings from Camera(s) to File(s)
This command opens a file-save dialog box for selecting the names of the camera-settings files to save.
Default filenames will be generated automatically based on camera IP-address and date/time. This
feature will “Backup” all camera properties including camera-specific settings like the static IP-
address and User Information so it can be used for “Restoring” the settings from file to a new camera
if the camera hardware has been replaced.
2.5.4 (d) =>Advanced Settings=>Import Settings from File to Camera
This command opens a file-open dialog box for selecting the camera-settings file to import into the
selected camera. This feature will setup all camera properties including camera-specific settings like the
static IP-address and User Information so it will for instance be used for “Restoring” the settings from
file to a new camera if the camera hardware has been replaced. If only the “System specific” settings
Vista de pagina 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 71 72

Comentarios a estos manuales

Sin comentarios