Pulnix TS-9720EN Series Manual de instrucciones descargar pdf (Pagina 52)

Page 42

Installation and Operation

VIS 300/400 EN Setup Software

The image tags are generated inside the camera and therefore contain information such as status, Light

Sensor readings, exposure settings, NTP status and other important data from the time of the image

capture inside the camera. All ITS-specific information is placed in the “ITS Camera Tags” category.

2.6.12 Manual Exposure Window

Normally camera parameters are optimally controlled by the light sensor, and it is not necessary to

manipulate them manually. However, during installation and adjustment of the cameras at nighttime it is

often necessary to manually adjust the shutter and gain values of the cameras in order to make the

camera sensitive enough to produce usable images. This will temporarily disable the Light Sensor

exposure control (ADR) inside the camera and force the camera to use manual exposure values instead.

Do not change these parameters, unless you know exactly what you want to do. To use the Manual

Exposure simply select the =>Manual Exposure context menu in the Video Window. This opens a

new window that enables direct control of the camera.

FIGURE 50. Manual Exposure Window

Each parameter can either be selected using the spin-buttons to the left or by moving the individual

slider-controls.

2.6.12 (a) Shutter Value:

The Shutter Value setting directly controls the exposure-time used by the camera. Please refer to TS(C)-

97WEN and TS(C)-2030EN Operation Manual for corresponding exposure time.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 71 72

Sin comentarios

Pulnix TS-9720EN Series Manual de instrucciones Pagina 52